User manual Kenwood PG520
 Operating instructions for the KENWOOD PG520 meat grinder |
Operating instructions for the KENWOOD PG520 meat grinder
Safe operating precautions. Before checking meat products, it is necessary to remove bones and film from meat, because bones can damage and blunt knives, and the film will wind up on knives, which is not good. Turning nuts in a meat grinder, it is also necessary to make sure that there will be no shells with them. And remember, the next portion should be laid only after checking the previous portion.
Before installing, or removing parts from the meat grinder, or before washing the meat grinder, it is necessary to disconnect the plug of the power cord from the outlet.
It is recommended to promote the products with a special pusher that comes with the kit. You should not do this with your hands, because there were enough cases when the user skipped his fingers along with beef. When washing parts, remember that the cutting edges of the knives are sharp enough to get hurt. Before turning on the meat grinder, make sure that the nozzle is securely installed.
Penetration of moisture into the engine compartment is not allowed, it is necessary to avoid electric shock. It is also better to keep the power cord and plug dry. It is forbidden to use a faulty meat grinder. See useful information about checking and repairing the meat grinder in the "Maintenance" section of this manual. All household electrical appliances operated in the kitchen are subject to periodic inspections and tests. Make sure that the power cord does not hang on the floor, because there is a chance of catching on it and causing the meat grinder to fall, which can cause injury, especially for children. In the meat grinder, on the back, there is a special bracket where you can wind an extra cord. It is forbidden to use the meat grinder independently for weakened people and children. Do not let children play with the meat grinder, this device is intended only for domestic use, do not use it for industrial purposes, for example in a cafe, this will quickly disable the meat grinder, it is not designed for a long period of continuous operation.
The mains voltage in your home must correspond to the specified value on the body of the meat grinder. The European Economic Community assures that this meat grinder meets all standards and requirements for safe operation, but only if all the requirements given in the operating instructions are met.
Instructions for the correct assembly of the meat grinder. Carefully insert the screw into the body of the meat grinder, then install the knife with the cutting edge outward and check that it is installed correctly, otherwise the meat grinder may be damaged. Next, the desired grid is installed, the protrusion of which should enter the special groove. Keep in mind that the grate for small chopping is needed for chopping meat, fish, small nuts or boiled meat. Grate with medium holes - suitable for rough chopping in addition to the above and for hard cheese and dried fruits. Use a grate with large holes at your discretion in any case, any product will pass through it anyway.
Instructions on how to use the Kenwood PG520 meat grinder. The clamping screw is loosened by turning counterclockwise, then the nozzle is inserted into the socket. Installation in the working position is achieved by sequentially turning the nozzle in opposite directions until a characteristic click, then the clamping screw and the ring nut are tightened and the tray is installed. Before passing the product through the meat grinder, you must not forget to put dishes under it to collect chopped products into it. It is necessary to completely defrost frozen foods, if it is meat, cut it into strips 2-3 cm wide.
The meat grinder turns on by pressing the green button, and turns off by pressing the red button. Remember, excessive efforts when feeding the product can cause the meat grinder to break down. If there is a sudden stop or jamming of the meat grinder during operation, you need to turn it off immediately. Then press the reverse switch, you need to do this for a short time. As a result, the stuck parts of the product will be released and they can be easily removed. To do this, you will need to turn off the meat grinder, open the nozzle cover. The meat grinder has an emergency shutdown system, triggered in any non-standard cases. If this happens, eliminate the cause of the emergency shutdown and turn on the meat grinder again by pressing the green button.
Instructions on how to use the sausage stuffing nozzle. It is recommended to soak the shell in cold water for 30 minutes and only then start stuffing food into it. First you need to loosen the clamping screw by turning it counterclockwise, then insert the nozzle into the socket. By consistently turning the nozzle in opposite directions, it is necessary to achieve its installation in the working position, that is, until a characteristic click. Tighten the clamping screw and insert the screw into the body of the meat grinder, install the base in the ledge that should enter the groove. Install the funnel with the shell on it on the meat grinder and tighten the ring nut by hand. Install the tray and turn the meat grinder into working mode. Use the pusher to push the product through the feeding tube without unnecessary effort. Remove the shell from the nozzle as it is filled. Do not overload the meat grinder with work so that it does not overheat, this is especially true on hot summer days.
Instructions for the care and cleaning of the meat grinder. Wipe the engine block with a damp cloth, then dry everything. Unscrew the ring nut, remove it, rinse all the parts with hot soapy water, then dry them. No need to wash them in the dishwasher. Never use soda! After drying, wipe the grate with vegetable oil and, wrapping it with paper, leave it for storage. You can use the pusher cover as a case for storing attachments. Always replace the damaged power cord, this is necessary for safety. It is better to do this in the service center from the company Kenwood. If you need advice on the use of a meat grinder, as well as on the purchase of spare parts or repairs, contact the store where you bought this meat grinder.
DOWNLOAD size 524 Kb "Kenwood PG520 user manual"