User manual Mystery MX-607


Instructions for the Mystery MX-607 car security system
Instructions for the Mystery MX-607 car security system

Instructions for the Mystery MX-607 car security system

The main features of the Mystery MX-607 car alarm system. The remote control is a pager with a liquid crystal (LCD) display, the range of which reaches 1 km, provided that there is no interference and high-rise buildings around. The keychain is able to control the presence of an anti-Grabber in the reception area, that is, a changeable radio control code. Different security activation channels. The operating frequency of the system is 434 MHz. There are two modes - with sound and without sound, but with vibration. It is possible to program additional key chains. Microprocessor control ensures sufficient security during the security process, this is achieved by complete control of the doors, hood and trunk. There is a remote separate shutdown of these sensors. You can also connect an additional two-level sensor. The service button allows you to turn off the system in an emergency. Three additional universal control channels allow you to use all the features of the security system more comfortably. There is a function of automatic activation and return of the security mode. The user can turn on or off the system without a keychain. A sufficiently good protection against false alarms will not allow the car owner to worry unnecessarily. The parking search mode will allow you to quickly find a car among other cars. Two-step unlocking of doors will not allow thieves to get into an atomobile, for example, at a gas station. The user can view a report on system triggers. The temperature range of normal operation of the system is from -40 to +85 ° C. If your car has a diesel engine or a turbocharged gasoline engine, the built-in turbo timer will ensure the gradual cooling of the turbine. there is a mode of arming with the engine running.

The MYSTERY MX-607 system is designed for light and sound notification of the user about the penetration or impact of a vehicle. The system allows you to activate service functions at a distance and block the engine start circuits.

MYSTERY MX-607 car alarms are allowed to be used on the territory of Russia and comply with the requirements of regulatory documents of Russia. For about 5 years, you can safely and without problems use this car alarm, but on condition that it is operated in compliance with all the requirements of this instruction.

The immobilizer is an automatic blocking of the start of the engine start. In the system, it is programmable. To deactivate this mode, you need to press the desired keychain button. If this is not done and you try to start the engine when the immobilizer is active, the siren of the system will give a warning long and short signals, and after another 10 seconds it will turn on the sound alarm, which is turned off only by using the service button, which is usually hidden under the instrument panel or entering a PIN code.

To prevent someone else from disconnecting the system by pressing the secret service button, it is possible to program it with a personal code.

To unlock the trunk from the keychain, additional connections are required, which ones you can see in the instructions for use in the section "Unlocking the trunk". If all connections are made, press and hold the keychain button for more than 2 seconds. With this action, the system will disable the monitoring of the trunk sensor and the impact sensor for a while. The corresponding icon will appear on the display of the car alarm panel and one short beep will follow. After closing the trunk, the icon will disappear from the display and a short beep will also follow, and the system will take the car under its protection again. If the trunk is not closed for more than 1 minute, the keychain will periodically emit warning signals.

Among other things, the car alarm system is able to control the interior lighting, that is, after disarming, the interior lighting will continue to glow for 30 seconds and then go out, but if you have time to turn on the ignition or the security mode at this time, the light will also go out.

Turbo timer mode is a programmable function that requires additional connections when installing a car alarm. If all connections were made correctly during the installation of the car alarm, after removing the key from the ignition lock, the car alarm itself will keep the motor running for 1 to 10 minutes, depending on the settings. Then it will safely drown it out.

If all the necessary connections are made during the installation of the system and the correct programmable function is selected, then before removing the key from the ignition lock, you will need to press the button on the keychain for 2 more seconds, after that a short siren signal of successful command execution should sound. At the same time, the LED flashes green, confirming the activation of the mode.

DOWNLOAD size 577 Kb "Instructions for the Mystery MX-607 car security system"

DOWNLOAD size 925 Kb "Instructions for the Mystery MX-607 car security system install"